+ Reply to Thread
Results 1 to 9 of 9

Thread: Improve LG accuracy

  1. #1
    Junior Member F4WN is on a distinguished road
    Join Date
    Nov 2012
    Posts
    4

    Improve LG accuracy

    Hi! I want to improve LG accuracy, with bot i usually reach 40-45% accuracy easily, but in an online CA 1vs1 (Thunderstruck) i reach only 10-15% accuracy...

    My ping is 30ms (italian servers) and 40-50ms (other servers). I use cg_truelightning = 0.97/0.99 and FOV 103 on a 1280x800 monitor (It's not a 120hz monitor ). My mouse is: CM Storm Sentinel Zero G and my mouse pad is: Roccat Sense (I'll buy a Steelseries Qck soon). My mouse options are:

    -Sensitivity: 4.55
    -Accel: 0
    -in_mouse: 2

    And i use 1600CPI.

    I know i have to use strafe key to aim, but my accuracy doesn't improve! If you need a demo i'll upload here soon

    Thank you!

  2. #2
    Senior Member JustLOL is on a distinguished road JustLOL's Avatar
    Join Date
    Feb 2012
    Location
    Croatia
    Posts
    287
    1. Read this: http://www.quakelive.com/forum/showt...the-next-level
    2. Watch this: http://www.youtube.com/watch?v=cIc3L6x9Z-A
    3. Change your sensitivity to something sensible. 4.55 at 1600cpi is 5.7cm/360, I wouldn't expect more than 25% on anyone who has both strafe keys bound. Use this calculator to find something better: https://www.funender.com/quake/mouse/index.html . I suggest 20-25cm for a start.
    4. Get some practice with the new settings
    5. Upload a demo so we can see where exactly you're failing
    "Men no longer prefer blondes; today, gentlemen seem to prefer gentlemen."

  3. #3
    Junior Member sakarauka1 is on a distinguished road
    Join Date
    Sep 2012
    Posts
    7
    You might wanna look into getting some better gear: http://www.quakelive.com/forum/showt...r-and-Settings

    I'll buy a Steelseries Qck soon
    Stay away from that. The guide I linked to will tell you why, it will also go over mouse sensitivity in some depth, so make sure to read that.

  4. #4
    Senior Member Cat will become famous soon enough Cat will become famous soon enough Cat's Avatar
    Join Date
    Aug 2010
    Location
    Sweden
    Posts
    1,908
    Quote Originally Posted by sakarauka1 View Post
    You might wanna look into getting some better gear: http://www.quakelive.com/forum/showt...r-and-Settings



    Stay away from that. The guide I linked to will tell you why, it will also go over mouse sensitivity in some depth, so make sure to read that.
    That reminds me, I need to remove that line about the Artisan glides. I tried them. They sucked.

    EDIT: Went ahead and edited some other crap while I was at it. Man, I really put no effort at all into that guide...

  5. #5
    Junior Member F4WN is on a distinguished road
    Join Date
    Nov 2012
    Posts
    4
    Quote Originally Posted by JustLOL View Post
    1. Read this: http://www.quakelive.com/forum/showt...the-next-level
    2. Watch this: http://www.youtube.com/watch?v=cIc3L6x9Z-A
    3. Change your sensitivity to something sensible. 4.55 at 1600cpi is 5.7cm/360, I wouldn't expect more than 25% on anyone who has both strafe keys bound. Use this calculator to find something better: https://www.funender.com/quake/mouse/index.html . I suggest 20-25cm for a start.
    4. Get some practice with the new settings
    5. Upload a demo so we can see where exactly you're failing
    I changed my mouse options:

    CPI: 400
    Sensitivity In-Game: 5
    Mouse Acceleration: 1

    20CM/360

    I installed Windows (before i was on Mac OSX) because i saw that there was a small delay in the mouse movements (I think because Mac doesn't support 1000Hz USB polling rate) and i found the problem: i predict the enemy's movements and according to cat's guide it's not very good. Now i have to practice LG WITHOUT predict the enemy's movements and i think my accuracy will increase.

    I fighted with Bones in Eye-to-Eye map and i reached 54% accuracy, and i didn't predict his movements.

    When i will find a match to fight 1vs1 only LG i will upload the demo

    PS: With 30/50ms ping it's good as a cg_truelightning value 0.97 ? And have i to change my mouse pad (Roccat Sense)?

    Thank you very much

  6. #6
    *baerlic
    Guest
    Remove acceleration and your shaft acc will increase. Fighting bots is a really poor test for real games. In terms of mousepad it depends on your playstyle. If you want to be fast then you need a fast pad like artisan hien, if you want to be really accurate/precise then get a slower pad like ss qck.

  7. #7
    Senior Member Lorfa is a jewel in the rough Lorfa is a jewel in the rough Lorfa is a jewel in the rough Lorfa's Avatar
    Join Date
    Aug 2010
    Location
    Kepler-22b
    Posts
    8,639
    accel 1 is extremely high, and with sens 5 to boot. I'm surprised you were able to aim this way.

  8. #8
    Member Pyron83 is on a distinguished road Pyron83's Avatar
    Join Date
    Mar 2011
    Location
    Hellstorm
    Posts
    47
    pull acceleration down to 0.1 max 0.2
    "Living or Dying, we all feed the Fire"

  9. #9
    Junior Member F4WN is on a distinguished road
    Join Date
    Nov 2012
    Posts
    4
    Well... I disabled mouse acceleration and i reached in three online matches (clan arena) 33% accuracy and i'm very happy! Thank you very much!

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts