View Poll Results: Do you like WolfcamQL?
- 704. You may not vote on this poll
I Like WolfcamQL
I Dislike WolfcamQL
06-07-2013 08:32 AM
@nom6d: try this
this should be pretty close to what you're looking for
06-07-2013 05:09 PM
I have a very slow capture cfg (1min ~ 2hours), but if at the same time open 8 wolfcamqls, so record up to 8 times faster using a different demo, but it is difficult to control. But it's whim.
06-19-2013 06:39 PM
In my experiments, I found out that the relationship is not much of ping, but on maxpackets while recording demos. Command / cl_maxpackets 125 (default 63) in game so the demo record is good if connection good.
Demos with bad maxpacket record is no possible smooth look movie. Ideal maxpackets 100-125. For example(very bad case) - demos have maxpacket 30-40 so this demos have 30-40 effective fps, no matter what drawfps shows 125 - capture, in this case more than 40fps is useless. I'm looking for a way to improve the demo with poor maxpackets, but so far without success. I would be glad of any help for it.
I have 60 ping and record this demo with command /cl_maxpackets 125. Capture settings 60fps 10blur so give aversome result - http://www.youtube.com/watch?v=zW0TC...ature=youtu.be
125fps 20blur - http://www.youtube.com/watch?v=jH3QG...ature=youtu.be
Last edited by HUK; 06-19-2013 at 08:23 PM.
06-20-2013 01:57 PM
Second link is awful quality at speed. 20 blurframes is too much in my opinion.
06-25-2013 07:25 PM
1) %V victim name - color not removed in fragmessage. How to remove color of victim name in fragmessage (wolfamql 9.11)?
2) How to give normal proportions for rewards icons?
06-26-2013 03:51 AM
cg_drawFragMessageTokens "You fragged %v" <----default
Available tokens: (shortened list)
>> %V: victim name with color escapes removed
%k: killer name
%K: killer name with color escapes removed
>> %c: hex color code ex: %c0xff00ff you can also use the usual color codes: \
%l: victim's clan tag
>> %L: victim's clan tag with no color codes
%x: killer's clan tag
%X: killer's clan tag with no color codes
so try: cg_drawfragmessagetokens "You fragged %V"(note: capital "V")
The stretched medal might be to do with your aspect ratio. Have you installed any custom textures?
Last edited by EARTH_QUAKE; 06-26-2013 at 02:43 PM.
06-26-2013 06:38 AM
Thanks for the answer, but:
Originally Posted by EARTH_QUAKE
I use "You fragged %V(not default %v)" but color victim is not removed in some victim`s name.
How to change rewards medal and there his places ? I removed medalls in pak00.pk3\ui\assets but no remove in screen
Last edited by HUK; 06-26-2013 at 11:58 AM.
06-26-2013 02:42 PM
Hmm odd. Freeze tag had a different command:
seta cg_drawFragMessageTeamTokens "You fragged %v, your teammate"
seta cg_drawFragMessageThawTokens "You thawed %v"
seta cg_drawFragMessageFreezeTokens "You froze %v"
seta cg_drawFragMessageFreezeTeamTokens "You froze %v, your teammate"
also if you have cg_drawFragMessageSeparate "1"
seta cg_obituaryTokens "You fragged %V" is the relevant cvar (now cg_drawcenterprint "0" only prevents messages such as "blue wins the round")
aaaah don't do that! NEVER modify the quake .pk3 files!
It is all the default textures (compiled by me). Place each folder (e.g. textures or sprites) loose in wolfcam-ql. Now anything you place in these folders (if it's the right place/filename/ filetype) overrides the ones in baseq3, so now you can edit "ui/assets/medal_impressive.jpeg" to your will.
Are your excellent medals also stretched?
Last edited by EARTH_QUAKE; 06-26-2013 at 02:51 PM.
06-27-2013 05:14 AM
I figured out how to completely remove the color from the victims' names. In cfg does not possibly it, but with the help qldt can be removed such "^x" color code of players name in demos. - http://imagehost.spark-media.ru/i4/B...9D21F0C1FB.jpg
I downloaded your files, but I can not yet know how to use them.
The problem of medal proportions is not in Pk3. The problem with the proportions of the medals in the CFG, I checked the other CFG - there were normal proportions of medals. Now looking for differences between the CFGs but have not found anything to fix my CCF.
Last edited by HUK; 06-27-2013 at 06:01 AM.
06-28-2013 03:12 PM
Wonderful. That screenshot could have been NASA's control panel, for all I know.
Originally Posted by HUK
I just explained. Inside you will find folders such as textures, models, ui, menu, gfx etc. Do not change the LOCATIONS/NAMES of any files within this folder, but move ALL of them into the folder "wolfcam-ql". Screenshot:
Originally Posted by HUK
Folders with red dots are the ones you should move from "ALL DEFAULT QUAKE TEXTURES" to "wolfcam-ql". Now anything you edit in here (as long as you don't change file names) will override pk3 textures. Exciting, right?
I agree though, your medal problem is with the cfg. You must keep a changelog! Longshot, but what is your cg_custompixelaspect? Sounds interesting Are you using a 16x9 resolution?