DPI question

[XSL]

So i use strenx sensitivity which is sensitivity 2 at 400dpi. I'm wondering if i should be using 800dpi for such a low sens to avoid skipping?

[clashie]

400 is still far more than enough resolution

[XSL]

Also not sure if it matters but i use 1920x1080 at 90fov.

[Lorfa]

Also not sure if it matters but i use 1920x1080 at 90fov.

You do not need 800 cpi per http://phoon.us/mouse/ (at least with sensitivity 2 you don't, estimated useful cpi for it is 294).

If you prefer it and it works for you then by all means.

I have no idea what settings strenx uses for the mouse itself, does he use a xai? If so there are many, many options.

[Adderall]

Use whatever dpi works for you ie 200 or 2000

[keefy]

Frget what all these pro players use and configure your config your way there is no right or wrong everybody is different unless they are the same.

[thuNDa]

but strenx does play 800dpi sens 1...

[XSL]

1 last question. I always thought the lower the sensitivity, the more dpi you required.Anyway does accel have any effect towards how much dpi you need if you have really high accel values?

[Adderall]

xsl setup your mouse what feels good for you

[clashie]

DPI is almost always just a sensitivity multiplier / divider in reality.

unless your setup borders on comical, you'll have more than enough resolution to go around, but if 800 makes you feel better then go ahead.